5 Mistakes to Avoid in Tree Cutting Services

 Sometimes, you need to remove trees from your property. This could be because of storm damage, disease, or if you want to make space for other landscaping ideas.

However, incorrectly cutting down trees can damage your home or yard and be dangerous if large falling branches aren’t controlled. That’s why you should understand common mistakes people make with DIYtree trimming before grabbing a chainsaw.


Avoiding these errors ensures proper tree felling technique safety and minimises negative impacts on the surrounding landscape. This guide from the professionals at SWTC will cover the top 5 mistakes to avoid with tree-cutting services. Knowing what not to do makes your next removal much simpler.

Not Securing the Area
Before any cutting begins, properly preparing the area is crucial but often forgotten. This prep work entails roping off the space beneath the tree’s canopy to avoid damage when branches fall. Any items or furniture are cleared away, especially vehicles that could be smashed by large falling debris. Hazards like power lines must be noted and extra caution is taken around them.

Don’t neglect thoroughly assessing what’s around and underneath the tree first. Rushing into cutting without securing the space leads to accidental property damage and dangerous situations if falling limbs go uncontrolled. SWTC’s tree services Sydney teams always secure work areas first for safety.


Improper Undercutting
Making the correct notches and cuts to fall the tree in the intended direction requires knowledge and skill.

Improper undercutting techniques can cause the tree to fall unexpectedly in the wrong direction, breaking nearby items or structures.

Cutting at an incorrect angle or leaving too narrow of a hinge can also lead to losing control of the falling tree.

Instead, follow best practices by consulting a professional arborist like those at SWTC. Their tree lopping Sydney and removal technicians know the precise undercutting methods to safely fell trees of all sizes.

Leaving Partially Cut Trees
After felling the tree, the job isn't done until the branches and trunk are properly sectioned. Amateurs often partially cut through branches or the main stem but leave dangerous hanging debris in the air. These partly cut limbs or tops can then unexpectedly fall later, damaging property or potentially injuring someone.

Always completely follow through by cutting any partially freed sections fully free for safety. SWTC's arborists Sydney crews will remove all debris, never leaving loose hanging sections that could detach unexpectedly later. They also offer branch chipping and tree mulching services to tidy up afterwards.

Not Cutting Close Enough to the Trunk
For tree health, the proper technique requires cutting branches flush to the trunk or parent limb without leaving stubs. Cutting too far out from the trunk leaves branch stubs that protrude. These ugly stubs won’t heal correctly and allow decay to take hold. Over time they become weak points and potential hazards.

For a clean structure, always prune back to the branch collar area near the trunk or nearest supporting branch without leaving remnants. SWTC's tree pruning teams are trained in the latest techniques to remove limbs fully for optimal tree health. They’ll never cut too far out or leave hazardous branch stubs sticking out.

Leaving High Stumps
Felling trees often leave unattractive stumps sticking several feet up from the ground.

Avoid leaving tall stumps by having your tree removal company cut them as close to the ground as possible. SWTC’s skilled tree services can lower trees, leaving almost no remaining stump above ground.

For existing stumps, their stump grinding service can chew them away down below ground level efficiently. Let them handle the hard work.

Conclusion
Learning how to cut down and dispose of trees properly helps prevent accidents, damage to property, waste of resources, and other problems. Mistakes can still happen, but avoiding these common errors will reduce negative impacts and help us stay within the budget for projects.

For complex Tree Cutting Services, SWTC offers the equipment, manpower, and expertise to fell trees perfectly every time. From tree lopping to their stump grinding service, SWTC is there when you need help






המאמר מזכיר את האנשים הבאים: Sydney Wide Tree Cutting

המידע הזה מתפרסם לפי רישיון לשימוש חופשי במסמכים של גנו (GFDL)
אתה צריך להכנס למערכת על מנת לערוך את המאמר

תגובות

Please log in / register, to leave a comment

ברוכים הבאים ל JewAge!
חפש מידע אודות מקורות משפחתך